At what temperature can you put a tile: laying ceramic granite, street technology, put on the porch what
covered tiled surface will last for many years, it is necessary not only to comply with the rules of operation and maintenance, but also to lay it, adhering to the rules. The technology of street laying is not complicated, it is only necessary to follow the instructions given on the packaging, observe the standards and perform work at the correct temperature.
- Stacking of porcelain stoneware outdoors or in a cold room
- Is it possible to lay street tiles in cold weather?
- Temperature and requirements for laying tiles: tips from
- Techniques for laying porcelain stoneware in the street: pluses and rules
- Recommendations: the temperature at which you can lay tile( video)
Laying porcelain tiles on the street or in a cold room
most common tiles are made of such material,which is not sensitive to changes in temperature, frost, but compositions that must lay tile can not seize, resulting in deterioration of por
When laying porcelain produced in an unheated room, you can create the required conditions and perfectly do the job:
- Closes all the window frames and doors;
- It's also better to remove the slots;
- Then you need to install heaters - electric, infrared or heat guns;
- The desired air temperature should be reached, it should be more than +10 ° C;
Put winter granite in such a case only one day after the heaters, because to warm, the air inside the room, and wall. Tile floor tiles and glue should be stored in the same room, so that their temperature does not differ from the temperature of the walls, then with these materials it will be much more convenient to work.
Heaters should not be switched off for the entire period of operation.
But it is necessary to adhere to certain rules - do not direct the jet in place of masonry, so as not to lead to uneven drying of the adhesive, if the heater runs on gasoline - must be good ventilation, it is impossible for these purposes to use an open flame. After it was possible to lay the tile correctly, it is necessary to leave the heaters on for another day, so that the tile glue and mortar are seized and held tight for a long time.
Can the Pavement tiles in cold weather
Many owners are wondering what kind of facade tile can be put on the porch, and whether it is allowed to do in cold weather? Specialists give a certain number of tips to make this process as successful as possible.
- At the time of the laying work, you must make a temporary shelter.
- Inside this shelter it is desirable to create the necessary temperature - a similar process is quite troublesome, so if you can postpone work before warming, it is better to do it.
- as a canopy to use polycarbonate or polyethylene film, these materials hold great temperature and allow carrying out work without too much difficulty, gradually moving on the territory.
The place where the tiles will be laid must be cleaned of dust, dirt and debris, it must be perfectly clean. Only after the work place has been warmed up completely, it is possible to start laying.
temperature and requirements for laying tiles: expert advice
Before laying the tile, you need to get acquainted with the work of the technology for this material, as well as adhere to certain rules. To begin the process of working only after the acquisition of all the necessary tools and materials.
The work must be carried out only if there is good lighting to comply with all parameters and norms. When laying tiles, use only the products specified in the manufacturer's instructions and recommended as an adhesive and grout.
After a certain period, check:
- With corners level;
- Uniformity of laying;
- Check with the picture.
Before laying, the surface must be carefully prepared. Experts do not recommend placing tiles on the concrete base just made, the exposure should be at least 2 months, otherwise cracks will form on it, and the ceramic tile will not stick. When laying the tiles with your own hands on the street or in a cold room, you need to know about the properties of the material - it must have frost resistance so that in winter you can tolerate low temperatures without difficulty.
Adhesives and mixtures used for grouting, it is better to purchase frost-resistant and moisture-proof, it is also necessary to read the instructions for working with these substances.
Proper application of the adhesive and adherence to the laying technology results in quality work and a long service life of the tiles. Also it is necessary to choose the correct size of the comb, corresponding to the parameter of the tile - small ones on a large surface will not give the necessary clutch, and large ones on a shallow one - will lead to the creeping out of the solution through gaps. The final stage is the proper grouting on the reverse side
Technology laying porcelain tiles on the street: the pros and rules
Tile has many advantages. It is able to withstand temperature fluctuations in the open air, and also to protect the pavement from dirt in wet weather. On the market there are a lot of tiles of various shapes, colors and sizes, allowing to recreate interesting design solutions and projects. This material is environmentally friendly, and also has to be repaired in case of damage. The laying process is quite simple, allowing you to do the work yourself, without involving specialists, saving money.
There are several options for laying tiles on the street:
- the prepared concrete base;
- On a sand cushion;
- Directly on the soil itself.
Each method has its pros and cons, and what to stay - it's owners. Before buying porcelain stoneware, it is necessary to check the following indicators - frost resistance and porosity of the material, degree of moisture resistance and coefficient of erasure. The last indicator is especially noteworthy, because if a lot of people are walking along the sidewalk, then it is necessary to take a more expensive and sustainable option, so as not to spend extra money every year for repair work.
It is also necessary to consider the degree of moisture resistance and the reaction to ultraviolet rays.
The laying technology consists of stages. Preparation of the very foundation - the irregularities, lumps are eliminated, and then the preliminary pouring of the territory with concrete or sand is filled up. When pouring with concrete, you need to wait for the right time to completely freeze it, in the case of sand - there is a thorough ramming of the place. If you use a substrate made of concrete, after the readiness of the place can be safely stacked granite, in the case of a sand cushion, it is necessary to impose a tamped several layers consisting of gravel, sand, dry mix, and then tiles. In the process of work, it is necessary to check the smoothness of the surface, the accuracy of laying the pattern, after a while to stir the solution to avoid settling of the particles, and also to do the grouting in a timely manner.
Recommendations: the temperature at which you can lay tile( video)
Such work is not heavy enough, but the result is excellent. In stores you can find the necessary materials for different price, quality and variety of colors. And following the advice of experienced professionals, you can manage for a short period of time yourself, laying the tile in the way you want in the style of the house and yard.