Tile alignment system: SVP and wedges for styling, video by hand, fast equalizer accurate

Thanks to the tile leveling system, it is possible to make the floor covering perfectly even Thanks tile leveling system can be perfectly flat floor What's the easiest method of dealing with uneven surfaces, how to learn to properly and evenly laid tiles or tile, which alignment system tested in practice - all this in the material below.

Contents:
    • What is a tile alignment system
    • How to use wedges for laying tiles
    • Self-aligning tile system in-house
    • Algorithm for laying tiles
    • Methods for fast laying of tiles
    • SVP: tile leveling system( video)
  • What SVP( tile leveling system)

    SVP is perhaps the best way to accurately laying tile, an innovativeA scheme of laying, both on walls and floor. This technique allows you not to use the help of professional tilers, and make the procedure yourself. It's no secret that these services are very expensive, so we have to look for an alternative. If you listen to reviews, then there are other ways of leveling, for example, the dry floor Knauf or Leroy, able to even almost all the differences.

    Before you start using the SVP, it is worth studying the theoretical part of the process Before proceeding with the use of the SVP

    , it is worthwhile to study the theoretical part of the process

    The so-called dry screed gives a self-leveling effect and can lie on different coatings:

    • Laminate;
    • Carpet;
    • Parquet;
    • tile, etc..

    But this budget option does not name, and this is a drawback. SVP is better than professional work, the final result will certainly please, without having much experience, it is possible to get a decent result.

    There are 2 elements in the SVP system - a clamp and a wedge.

    Unlike wedge which can be used many times, a material such as a clip is disposable, and its use does not involve re-use. According to their pricing policy, the materials are very affordable and not burdensome.

    How to use wedges for laying tiles

    Besides reusability, in this device there is also a function of multitasking. Their cost is not expensive, but the functionality is surprising. With the help of wedges, maximally parallel rows of tiles are achieved, which means that smooth and accurate seams will be obtained. Equalizer is used in the most unusual places for styling. Still can help in laying out the lower "cut" tile series.

    The device allows you to choose the required thickness and get a smooth seam of the upper part of the product.

    Among the advantages of wedges for laying tiles is worth noting a small price and efficiency Among the advantages of wedges for laying tiles, it is worth noting the small price and efficiency of

    Wedges are universal assistants during the facing of walls with artificial stone. In those cases where there is a significant difference in the size of the tiles, the wedges are inserted into the seam points to get a straight line. There are many moments when plastic products are bailed out in design and functional terms, and here they have taken their niche in the SPV system. But, like any system, there are both positive and negative sides. You should consider them in more detail.

    Advantages:

    • Setting the optimal level in a plane which ensures the service life of the coating and the speed of the process;
    • Obtaining the same intertile joints by accurately calculating the distance between the tiles;
    • Distribution of glue, by means of which it is possible to eliminate the disadvantages of the surface level by applying the required amount of the substance;
    • Absence of tile sagging;
    • Removing the deformation of the position with clamps.

    The disadvantages of the system in the difficulty of cleaning seams and removing and fixing the fastening takes time. An obvious fact in favor of the effectiveness of the technology is a weighty amount of positive arguments and rapid laying of tile.

    Tile alignment system with own hands in practice

    Following certain instructions, you can achieve good results when laying tiles or floors. Certain skills are not required, but still it is worth observing a number of practical rules and following safety precautions.

    To independently put the tile exactly, you need to first look at the training video and read the advice of specialists To manually put the tiles exactly, you must first see the video tutorial, and read expert advice

    consider a system step by step in the action:

    1. first step is to preform the adhesive according to the instructions. Do not deviate from the proposed recommendation, do strictly on the proportions.
    2. The adhesive is applied to the surface of the walls or the floor in the required volume and the required thickness. Initially
    3. necessary to substitute clip( clips, pegs, wedges, or home-made structure) in an amount of 2 pieces under the first tile glued on both sides, in this case, departing from the edge of about 0.5-1 cm.
    4. The same way put anotherTile and insert a wedge to be located between the top and bottom of the clamp. Lock the wedge.
    5. The alignment function itself is carried out by tight fitting the wedge part from the bottom to the tiles.
    6. Similarly, you need to "scatter" the wedges at the joints at the location of the clamps.
    7. After the adhesive solution has completely dried, wedges must be removed. To do this, use a hammer and strike the clamps in their side. In this case, the clamping element will remain below.

    This system is not new and will work well if the optimum temperature regime is observed from +10 ° C.Essentially, the fastening elements, as if binding the surface, intertwine the tiles with each other. Thus, a plane emerges without unevenness, becoming an ideal surface. Obviously, the application of this system for laying one's own hands serves to facilitate the task at deducing a qualitative level.

    algorithm of actions in the system tile

    There is a special DSL( DSL) system for laying tiles, facilitates the process of creating a floor covering, and simplifies installation. The technique is an excellent tool that prevents a possible tile rift or the formation of unevenness and other various disadvantages of the coating.

    DSL is represented as a set of important tools:

    • Caps;
    • Measuring instruments;
    • Tapes;
    • Wedges;
    • Clips;
    • Clamps and other.

    When laying tiles, it is recommended to apply a level or rule When laying tiles or recommended level generally

    Besides, can be manufactured independently and such a device as the clamp. It is made very simply. It is necessary for this to have an aluminum wire, from which a rectangle should be made. In places of folding, the material is slightly cut to easily bend relative to the dimensions. Biting at the base is necessary for easy removal in the future, after the glue dries.

    The support at the base is a small strip of any material, for example metal. At the top, the wire is twisted, forming the shape of a rectangle. As a clamp can serve as a wedge from the tile, complemented by a wooden shim that does not allow the clamp to move, and securely fix it.

    The kit is very light and easy to use, economical.

    Helps to perform the job as quickly and efficiently as possible. A feature of this technique is practicality in use with any material of the tile, besides, it allows to clamp the angle of 4 tiles at the same time. It is necessary to agree that the system is very versatile and very convenient.

    Ways of fast laying of tiles

    Such a lesson will still require care and accuracy of actions.

    Conditionally the process is divided into 2 stages - preparation and installation itself. Preparation for work begins with the removal of the old coating, its alignment and then ends with the step of priming. Then you can go directly to the styling.

    If necessary, under the tile can put an infrared or water-heated floor If necessary, the tiles can be put under infrared or radiant floor heating

    also need to buy some tools, such as:

    • Spatula;
    • Adhesive;
    • Special marker and others required in operation.

    There are several options for laying tiles: a seam in the seam, a diagonal, a dressing. To achieve a good result, you can only fine-tune the surface, and otherwise not achieve an even wall, on it the tiles will "dance".At the second step, the initial moment is placing the bar on the wall using the fasteners. This will help lay out the first tile row.

    Before you glue the first tile, the calculation is made and the corner that subsequently leads to the installation is fixed. Then the angle from which the facing begins will be determined. With the help of already diluted glue, an area of ​​exactly the size required for 1 m2 is applied. Tiles should be pressed evenly over the entire surface, all the excess adhesive should be removed. On the second corner, you may need to trim the tiles. After the glue has completely dried, all the excess elements are removed, and the seams are rubbed off.

    SVP: tile leveling system( video)

    Summing up, it is possible to recall the versatility of the handheld equipment of the SVP, moreover, not inferior to its functionality and simplicity, but most pleasantly surprising its price category. This is a wonderful analogue of factory production.